JCD2006
7
TUNER OPERATION
Select a Band
Press the
BAND
button
(9) to change between three FM bands and two AM bands. Each band
stores up to six preset stations.
Tuning
Auto Seek Tuning
Press the
TUNE
>>|
or
|<<
button (7) for less than three seconds to move to the next station
automatically.
Manual Tuning
Press the
TUNE
>>|
or
|<<
button (7) for more than three seconds to enter manual tuning
mode. Press the
TUNE
buttons to change the radio frequency number up or down one step.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button (13-18) for three seconds.
The unit will beep and the preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (13-18) to select the corresponding stored
station.
Automatically Store / Preset Scan (AS.PS)
Automatically Store
Select a band (if needed). Press the
AS.PS
button (3) for more than three seconds to
automatically select the six strongest stations and store them in the current band. The new
stations replace any stations already stored in that band.
Preset Scan
Select a band (if needed). Press the
AS.PS
button (3) to scan stations stored in the current
band. The unit will pause for five seconds at each preset station. Press
AS.PS
again to stop
scanning when the desired station is reached.
CD PLAYER / RECEIVER
JCD2006
40
WATTS X 4
AS PS
RDM
CH
CD-I
N
RPT
INT
13
14
15
16
17
18
19
