ALARM SETTING
1. Tap the
Alarm 1
or
Alarm 2
Button
once to check the alarm time and
wake up option (Radio
,
Beeping Alarm, Bluetooth
).
2. In standby mode, press and hold the
or
button for 3 seconds when the
alarm time is showing. The hour digits will blink.
3. Tap the
or
button to adjust the hour. Press and hold the button for fast
advance / reverse setting.
4. Press the
or
button to confirm the hour setting, the minute digits will flash
to prompt for input.
5. Tap the
or
button to adjust the minute. Press and hold the button for fast
advance / reverse setting.
6. Press the
or
button to confirm the minute setting, the alarm sound icons
will flash.
7. Tap the
or
button to select the wake up option (Radio
, Beeping Alarm,
Bluetooth
).
8. Press the
or
button again to complete the alarm setting. The alarm
indicator
or
will appear to indicate it is enabled.
9. To disable the alarm, in Standby mode, tap the
or
button twice for the
alarm you want to disable, relative alarm indicator will disappear from display. Tap
the
or
button twice again will enable the alarm.
Note:
•
The alarm will automatically switch to the beeping alarm if you selected wake to
Bluetooth but do not have a Bluetooth-enabled device connected.
•
If you select wake to Radio, make sure your radio station is set to the one you want
to be woken up to. The unit will play the last radio station you were listening to
when the wake time is reached.
•
The unit features a crescendo wake up for the beeping alarm, radio or Bluetooth.
When the alarm time is reached, the sound will increase gradually from a very low
level to a louder level. When waking to radio and Bluetooth, the preset volume
level will be the loudest level and it will be reached after about 30 seconds.
Wake to Radio
1. The Radio will automatically turn on when the alarm time is reached. The
respective
or
indicator will blink.
2. The sound starts softly and gradually becomes louder until preset volume level is
E-6
reached.
3. The radio alarm will sound for 60 minutes and then turn off automatically if the
snooze button is not pressed.
4. To stop the radio sound immediately, tap the
or respective alarm button.
