E16
Notes:
1.) Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth
operation, since it may vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP, it will not play the music
through the speaker, even after it's paired (linked).
3.) If you are pairing (linking) your computer to the JAS-725 using Bluetooth, you may
need to set the JAS-725 as your computer’s default sound device.
Re-linking to a cell phone or Bluetooth device
If your cell phone or Bluetooth device is already paired with the JAS-725, but became
unlinked at some point, even with both Bluetooth devices turned on. You can re-link them by:
1. Press and hold the /PLAY/PAUSE button to re-link your cell phone. The Indicator
LED will turn on and flash while linking.
2. Select the JAS-725 from the devices list on your cell phone for linking. The Indicator
LED stops flashing and remains lit if the JAS-725 and your cell phone have been re-linked
successfully.
3. You can also re-link the JAS-725 by using Bluetooth operation of your cell phone. Please
refer to operation manual of your cell phone for more information.
ANSWER THE INCOMING CALL
When your unit playing mobile music by Bluetooth and receiving an incoming call on your
mobile phone, the music will be stop and ring sound from your mobile phone. Tap the
PLAY/PAUSE
button to answer the call. Tap the button again to end the call, the music
will sound again (or press the PLAY button to play again).
LINE-IN OPERATION
This unit provides a LINE IN jack for connecting external audio devices like MP3 players, CD
players and listen to them through the speakers of this unit.
1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the cable.
2. To select auxiliary audio input, plug one end into the Aux IN jack on the back of main unit.
3. Plug the other end of the cable into the Line-out Jack or Headphone Jack of your external
audio device.
4. Turn on the external audio device and tap the button to turn on the main unit.
5. Tap the MODE button to select LINE IN mode, LINE IN indicator LED turns on.
6. The volume level can now be controlled through the main unit. Operate all other functions
on the auxiliary device as usual.
