background image

Printed in U.S.A.  Copyright © 2001, Jensen Transformers, Inc.

10

Section 4 - Warranty

For a period of 1 YEAR after purchase, Jensen Transformers, Inc. will, free of charge, repair

or replace any part of an 

ISO-MAX®

 product that fails due to defective materials or workmanship.

For a period of 20 YEARS after purchase, Jensen Transformers, Inc. will, free of charge,

repair or replace any Jensen OEM transformer or any Jensen transformer contained in an 

ISO-

MAX®

 product that fails due to defective materials or workmanship.

Both limited warranties are subject to the following limitations:

1) Defects that are, in the sole judgement of Jensen, the result of accident, misuse, abuse, neglect,
mishandling, misapplication, faulty installation, unauthorized repair, modification, or acts of God
will not be covered by this warranty.

2) In the absence of proof of date of purchase, the date of manufacture (as determined from lot
numbers of internal parts and the records of Jensen Transformers, Inc.) shall be used in its place.

3) There are no express warranties except as listed above.

4) JENSEN TRANSFORMERS, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING
OUT OF THE BREACH OF THIS WARRANTY. Duration of implied warranties, if any, is limited to
12 months. If a problem develops with this product during the warranty period, call or write us
before attempting any repair. We can help you identify specific problems, and possibly solve the
problem, before the unit is returned to us for repair or replacement. In any case, DO NOT RETURN
THE UNIT WITHOUT AUTHORIZATION and instructions from us. Jensen cannot be responsible
for damage due to shipping or improper packaging. 

Limitations of Liability 

The information provided by Jensen about its products been checked and is believed to be

accurate; however, no responsibility is assumed by Jensen for its use nor for any infringements of
patents which may result from its use. No license is granted by implication or otherwise under any
patent or patent right of Jensen Transformers, Inc.

JENSEN PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS, OR IN ANY
APPLICATION WHERE THEIR FAILURE COULD CAUSE INJURY OR DEATH

.

Jensen reserves the right to make changes without further notice to any of its products.

Jensen makes no warranty, representation or guarantee regarding the suitability of any of its
products for any particular purpose, nor does Jensen assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation consequential or incidental damages. 

Содержание Iso-Max JT-MS-8N2











Отзывы: