![background image](http://html1.mh-extra.com/html/jensen/extreme-870272/extreme-870272_manual_644283010.webp)
CHAPTER VII
MAINTENANCE
KAPITEL VII
VEDLIGEHOLD
MAINTENANCE SCHEME
VEDLIGEHOLDSPLAN
487208DK0
VII – 2.8.168
7.2.8
Adjustment of V-belt tension
7.2.8
Justering af kileremslængde
For new V-belts, readjust belt tension after 10-12
hours of operation. After this check the tension at
the intervals stated.
Ved nye kileremme skal kileremspændingen efter-
justeres efter 10-12 timers drift. Derefter kontrolleres
spændingen med de angivne intervaller.
Multiply the centre distance, L, in metres by 1.5. The
obtained value indicates the permissible deflection A
in centimetres, when one V-belt is loaded with a
force F of the magnitude shown in the table below.
Adjust centre distance until the V-belt tension is
correct.
Multiply the centre distance, L, in metres by 1.5. The
obtained value indicates the permissible deflection A
in centimetres, when one V-belt is loaded with a
force F of the magnitude shown in the table below.
Adjust centre distance until the V-belt tension is
correct.
V-BELT PROFILE
FORCE
KILEREMSPROFIL KRAFT
SPZ/XPZ
3V
2.0 - 3.0 Kg
SPZ/XPZ
3V
2,0 - 3,0 Kg
SPA/XPA
4V
3.5 - 5.0 Kg
SPA/XPA
4V
3,0 - 5,0 Kg
SPB/XPB
5V
5.0 – 7.5 Kg
SPB/XPB
5V
5,0 – 7,5 Kg
SPC
8.0 – 11.0
Kg
SPC
8,0 – 11,0
Kg