VOLUME Knob:
Advance this Volume control to harmonize your EHT-909 with Front /
Center speakers etc. DO NOT set this on maximum (see below setting recommendations).
LOW LEVEL IN and OUT sockets:
Connect to IN (red) socket from your AV
Receiver. The OUT (black) socket is to connect additional EHT-909’s using a 1RCA to 1 RCA
lead. You may add as many EHT-909’s as you are game (see page 3). You can buy these leads
in 2,5 or 10 mtr lengths from our website.
Connections.
Option A.
Using with AV Receiver in 5.1, 7.1, 9.1 etc.
Connect a 1RCA to 1RCA
lead (available from
our website) from
SUB-OUT on
your AV
\Receiver
to LOW
LEVEL IN
(red socket).
Option B.
Using with Stereo amplifier.
To add an EHT-909 Subwoofer to your Stereo
Speakers, run one pair Speaker Leads
from your Stereo amplifier to HI
LEVEL INPUT on EHT-909.
Then run another pair
Speaker Leads from HI
LEVEL to your existing
Speakers. With EHT-909
set to “AUTO” your
Subwoofer will activate
and work in sync with
your existing Speakers.
Note: there is no signal
or power loss between amplifier
and speakers, when “splicing-in”
your EHT-909 Subwoofer.
Stereo Amplifier.
Red/Black speaker
terminals.
.
Sub-Out
socket
.
.