Wired remote control not functioning
•
Try the reset button.
•
Verify remote is securely connected to the radio directly or via extension cable.
•
If using extension cable, try connecting direct to radio. If the remote works in this manner, the extension
cable is most likely damaged. Replace extension cable.
•
If the remote still does not work when connected direct to radio, the remote could be defective. Replace
with new remote.
•
Verify compatible remote is used. Only the MWR75 is compatible.
No iPod operation
•
Make sure iPod is connected to the iPod port on the rear of the radio with the
JIPDCBL12
cable.
•
Check for a damaged or defective
JIPDCBL12
cable. Replace with new if necessary.
iPod compatibility information
Fully-supported iPod/iPhone
models when used with the
JIPDCBL01, JIPDCBL12
or
JIPDCBL12B
iPod/iPhone models that will not
charge when used with the
JIPDCBL01, JIPDCBL12
or
JIPDCBL12B
Unsupported iPod models
•
iPod 3
rd
Gen
(w/firmware 2.2 only)
•
iPod 4
th
Gen
•
iPod Photo
•
iPod 5
th
Gen
•
iPod Classic
(80GB &
160GB versions only)
•
iPod Mini
•
iPod Nano
(1
st
, 2
nd
&
3
rd
Gen)
•
iPod Touch 1
st
Gen
•
iPhone Touch
•
iPod Nano
4
th
Generation
(Chromatic Series)
•
iPod 1
st
Gen
•
iPod 2
nd
Gen
•
iPod 3
rd
Gen (with
firmware other than
2.2)
•
iPod Shuffle
•
iPod Touch 2
nd
Generation
•
iPhone 3G
•
iPod Classic 120GB
B. Woods
Tech Services
03.22.07
Updated 04/30/09
