OPERATION
CR271ML
14
Preparation
Pairing a New
Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
1
Mode Indicator
2
Keypad
3
Backspace
4
Keypad Display
5
Music Display
6
Contact Display
7
Before using a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your
device before you begin the pairing process.
The unit broadcasts the pairing signal constantly when
no devices are currently connected. Complete the pairing
sequence from your Bluetooth device. Refer to the
owner’s manual for your device for more details. The
device name is “JENSEN CR271ML”. The unit can be in
any mode of operation when pairing is performed. On
certain phones, pairing may need to be done more than
once.
Most Bluetooth devices support the auto-connect
feature and will connect automatically if the device is
in range when the unit is powered-on. If your device
was previously paired but does not connect, enter the
Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from the
Main Menu or from any operational mode.
Press to return to Main Menu screen.
Displays the current mode of operation.
Use the keypad to dial a phone number.
Press to backspace when using the keypad.
Press to display the keypad.
Press to display Bluetooth music.
Press to display Contact list, then press desired contact
to initiate a call.
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
1
2
Bluetooth Operation
6
7
5
3
4
