18
CM901MIR
USB Mirror™ Operation
To set up USB Mirroring capabilities, select USB Mirroring from the main menu and follow
the on-screen directions for connecting your Android or iPhone. Once completed, the unit
will mirror phone display onto the unit’s on-screen display. To return to the main menu,
press the lower left corner of the screen to display and select the home button.
Note: Apple and Android operating system updates may cause your receiver to malfunction.
This can usually be solved by doing a software/firmware update on the receiver. To see if
your receiver has the latest firmware, contact customer service at 1-888-921-4088.
Note:
Mirroring is enabled only when the vehicle is in park and the parking brake engaged.
1. To return to main menu from USB Mirroring mode, touch the screen, will display the
Home icon and Rotation icon, Audio Mix and Reconnect buttons on the top of the display.
2.
Home icon-
Return to Home Menu.
3.
Rotation icon-
Press rotation icon to Rotate the Mirrored screen from horizontal to vertical.
(Tip: Manually rotate the monitor to the left or right until locked in the vertical/horizontal
position.)
4.
Audio Mix On/Off icon-
When turned on, the previous source in Radio mode will be played in
the background.
5.
Reconnect Icon-
Reconnects USB Mirroring if the connection is not working properly.
Main Menu
Current Mode Indicator
Rotation icon
Audio Mix On/Off
Reconnect Mirroring
1
2
3
4
5
1
2
3
4
5
Drong Screen App's QR Code
USB Mirroring
USB Mirroring
iPhone
1. Connect the phone to head unit via USB.
2. Click “trust” to start USB mirror link function.
S361TC8HV040VW
Note : If the mirroring fails, please unplug and re-insert the USB cable.
(Make sure to use original USB cable.)
Android Phone
1. Pair the phone to the head unit via Bluetooth.
2. Scan QR code to download and install the mirroring app. (REQUIRED for Android only)
3. After the installation is completed, connect the phone to the head unit via USB and
start USB mirror link function. (A permission pop-up will display on the device on first time
use, select “Allow” to enable permission)
