Jensen CDR7011, Инструкция по установке и эксплуатации

Страница: 19 / 28

19
CDR7011 OPERATION
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
Connect an external microphone to the MIC jack in the back of the
unit (no internal microphone is included).
The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from
your Bluetooth device. Refer to the owner's manual for your
device for more details. The device name is "JENSES CDR7011".
The Bluetooth passcode is "0000". The unit can be in any mode
of operation when pairing is performed. On certain phones,
pairing may need to be done more than once.
Most Bluetooth devices support the auto-connect feature and
will connect automatically if the device is in range when the unit
is powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and ensure that Auto
Connect is On.
To access the phone, select Bluetooth Phone from the Main Menu
or press the phone icon from any operational mode.
Displays current mode of operation. Press to return to the Main
Menu screen.
Use the phone keypad to dial the desired phone number.
Alternately, numbers can be dialed directly from the phone.
Press to display phone keypad.
Press to access the contact list.
Press to backspace when typing a phone number.
Press to display a list of recent calls.
Press to view available devices.
Preparation
Microphone
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Current Mode /
Main Menu
1
Phone Keypad
2
Display Keypad
3
Contacts
4
Backspace
5
Recent Calls
6
Devices
7
3 4
1
5 6 7
2