15
CDR6221
OPERATION
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The built-in microphone is located on the front of the receiver. An
external microphone is also included and is designed to mount on a
visor or on a pillar inside the vehicle.
The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from your
Bluetooth device. Refer to the owner's manual for your device
for more details.
The device name is "CDR6221".
The Bluetooth
passcode is "0000".
The unit can be in any mode of operation when
pairing is performed. On certain phones, pairing may need to be
done more than once.
Most Bluetooth devices support the auto-connect feature and
will connect automatically if the device is in range when the unit
is powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from the Main Menu or
press the phone icon from any operational mode.
Press to return to the Main Menu screen.
Use the phone keypad to dial the desired phone number. Alternately,
numbers can be dialed directly from the phone.
Displays current time.
Shows the current phone number as it is dialed.
Press to connect a call.
Press to backspace when using the keypad.
Preparation
Microphone
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
1
Phone Keypad
2
Clock
3
Phone Number
4
Talk
5
Backspace
6
1
3
4
5
2
6
