AFTER REMOVING THE HEAT SEALER FROM ITS PACKAGING MOUNT THE SEALER TO A TABLE
USING A 3/16 ALLEN WRENCH TO TIGHTEN THE CLAMP SCREWS (SEE # 2). BE SURE
THAT THE SEALER IS ATTACHED FIRMLY TO THE TABLE TOP. PLUG THE POWER CORD INTO A
110 VAC OUTLET.
!!!!WARNING BARS AND SURROUNDING AREA CAN BE VERY
HOT!!!!
COULD CAUSE SEVERE BURNS
!!!USE WITH EXTREME CAUTION!!!!
1 HEAT SEALING BARS
2 TABLE MOUNTING SCREWS
PAGE 2
