Mounting Speakers:
Remove any insulation completely away
from Speaker area. Insulation elsewhere
is fine.
Insert speaker into hole ensuring
Speaker wire is away from back of cone
to avoid a possible rattle.
Using Phillips head screwdriver, tighten
the 4 or 6 dog-clamp screws until you
feel Dog Clamps take grip (9~10 full
turns) against back of gyprock/plaster
.
At this point you can see the gap
between Speaker Frame and ceiling
close fully.
Then, nip these up –
do not over -
tighten
.
9~10
full turns
Main Tips:
1.
Use a Stud Finder to Pre-plan your locations.
2.
Use Laser level or Spirit level to ensure template is perfectly level.
3.
Both ends of Speaker Leads must be Pos (+) to Pos (+) & Neg (-) to Neg (-)
4.
Do not use Battery Drill.
www.
jensenspeakers.
com.au
24/7 Customer Support
info
@
bdimports
.
com.au
Warranty
These models have a
5 Year unconditional Warranty.
This covers … well, everything!
