12
Making Coffee using Pre-Ground
Coffee
IMPORTANT:
■
Never add pre-ground coffee when the coffee maker is off in
order to avoid it spreading through the inside of the coffee
maker and making it dirty. This could damage the appliance.
■
Never use more than one level measure or it could dirty the
inside of the coffee maker or block the funnel.
1.
Press
STRENGTH until the display shows
(pre-
ground).
2.
Open the cover and the pre-ground door.
3.
Make sure the funnel is not blocked, then add one level
measure of pre-ground coffee.
4.
Place a cup under the coffee spouts, then select your required
coffee from the home page.
5.
Preparation begins and the image of the selected beverage
appears on the display, together with a progress bar which
gradually fills as preparation progresses.
NOTES:
■
If you use pre-ground coffee, you can only make one cup of
coffee at a time.
■
While the coffee maker is making coffee, delivery can be
interrupted at any time by pressing
STOP
.
■
As soon as delivery has ended, to increase the quantity of
coffee in the cup, press
EXTRA
. Once the desired quantity is
reached, press
STOP
.
■
Once the coffee has been made, the appliance is ready to
make the next beverage.
Making Milk-Based Hot Drinks
1.
Remove the lid of the milk container.
2.
Fill the container with approximately 1/2 cup (100 mL) of milk
for each cappuccino you want to make. Do not fill above the
MAX line on the milk container. For a denser or more even
froth, use cold skim or partially skim milk.
3.
Make sure the milk intake tube is correctly inserted in the
bottom of the milk container lid and place the lid back onto
the container.
A
A. Center funnel
A
B
A. Milk intake tube
B. Rubber washer
04-Mar-2019 07:49:57 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")