Jenn-Air MGS8800PZ, Руководство пользователя

Страница: 19 / 56

19
Propane Gas Conversion
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death or
serious burns to children and adults.
1. Turn manual shutoff valve to the closed position.
A.
Gas supply line
B.
Manual shut-off valve closed position
C.
To range
2. Unplug range or disconnect power.
To Convert Gas Pressure Regulator (Natural gas
to Propane)
1. Remove the storage drawer. See the “Remove/Replace
Drawer”, “Storage Drawer” section.
2. Locate gas pressure regulator at rear of the drawer
compartment.
A.
Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
3. Remove plastic cover from gas pressure regulator cap.
4. Turn gas pressure regulator cap counterclockwise with a 5/8"
(1.6 cm) combination wrench to remove.
NOTE: Do not remove the spring beneath the cap.
A.
Plastic cover
B.
Gas pressure regulator cap with solid end facing out
C.
Gas pressure regulator cap with hollow end facing
out
D.
Washer
E.
Gas pressure regulator cap
5. Turn over the gas pressure regulator cap and reinstall on
regulator so that the hollow end faces out and the marking
“↓LP” is facing the direction shown in the above drawing.
6. Replace plastic cover over gas pressure regulator cap.
To Convert Surface Burners (Natural Gas to
Propane Gas)
1. Remove burner cap.
2. Remove the burner base.
A.
Burner cap
B.
Burner base
C.
Alignment pins
D.
Igniter electrode
E.
Gas tube opening