PLANNING
GUIDE
www.Dacor.com Phone: (800) 793-0093
Specifications subject to change without notice.
Install all appliances according to accompanying installation instructions.
8.1
30”, 36”, 46”, 48” Wide,
Slim Raised Vent
ERV30, ERV36, ERV48,
PRV30, PRV36, PRV46
30 ¼"
(768 mm)
to
37 ¼"
(946 mm)
10"
(254 mm)
30"
(762 mm)
18 5/8”
(473 mm)
5/16” (8 mm)
thick stiffener
across back
3 3/4"
(95 mm)
1"
(25 mm)
28" 3 prong
grounded
power cord
Vent shown
in raised
position
Product
data label
Motor
cover
Front of unit
6"
(152 mm)
2 9/16"
(65 mm)
9/16"
(14 mm)
2 1/2"
(64 mm)
1 15/16"
(49 mm)
B
A
Adjustable
anchor legs
2 1/8"
(54 mm)
2 3/16"
(56 mm)
3/16"
(5 mm)
Top cap with
vent down
DImENSIoNS SIDE VIEW
DImENSIoNS FRoNt VIEW
All tolerances: ±1/16” (±1.6 mm)
unless otherwise stated
warning
Observe all governing codes and ordinances
•
during planning and installation. Contact your
local building department for further information.
This appliance must be installed in accordance
•
with the accompanying installation instructions.
2 1/8" (54 mm)
3/8"
(10 mm)
2 1/8" (54 mm)
ERV top cap - side view
PRV top cap - side view
7/16"
(11 mm)
Model no.
a
B
Circuit
requirement*
ERV/PRV30
30”
(762 mm)
27 3/8”
(695 mm)
Three prong electri-
cal outlet connected
to 120 Vac, 60 Hz,
15 Amp. grounded,
dedicated, circuit
ERV/PRV36
36”
(914 mm)
33 3/8”
848 mm)
PRV46
46”
(1168 mm)
43 3/8”
(1102 mm)
ERV48
48”
(1219 mm)
43 3/8”
(1102 mm)
* Includes power supply requirements for external blower
nOTES:
The maximum installed height must not exceed the
1.
maximum specified countertop height of cooking
appliances.
install these raised vents only with approved Dacor
2.
appliances. See the planning guide for the particular
appliance for proper applications and cutout information.
This appliance must be install in conjunction with a
3.
single Dacor approved remote or in-line blower. See
following pages for approved blowers.
Document # PG08-001
Revised 03/29/10 Page 1/3
