Jenn-Air JWD7030CDX, Сервисная инструкция

Страница: 31 / 36

B-12
W
HEN
I
NSTALLING
B
ELOW
A
W
ALL
O
VEN
Warming drawers are suitable for installa-
tion below only certain specified wall oven
models.
See the label attached to the top of the
warming drawer for suitable models.
Drawer overlaps will conceal cut edges on
all sides of the opening.
The rough opening for the drawer
must be:
• Depth: 23-1/2" minimum from inside back
to front of cabinet frame.
• Width: 28-1/2"
• Height: 9-1/4"
• Allow 2" minimum between oven and
drawer cutouts for clearance of over-
laps.
NOTE: If you are installing in frameless
cabinets, it may be necessary to install 1/2"
wide cleats to accept drawer mounting
screws. See drawer to find exact locations
of mounting screws.
NOTE: Electrical receptacle can be in-
stalled as shown for countertop installa-
tions. Do not install receptacle above the
top of the warming drawer cutout.
I
NSTALLATION
B
ELOW A
S
INGLE
O
VEN
I
NSTALLATION
B
ELOW A
D
OUBLE
O
VEN
28 1 /
2
"
30"
*NOTE: Additional clearance between cutouts
may be required. Check to be sure that oven
supports above the warming drawer location
do not obstruct the required interior 23
1
/
2
"
depth and 9
1
/
4
" height.
28 1 /
2
"
30"
*NOTE: Additional clearance between cutouts
may be required. Check to be sure that oven
supports above the warming drawer location
do not obstruct the required interior 23
1 /
2
"
depth and 9
1
/
4
" height.