Jenn-Air JUBFL242HL01 Скачать руководство пользователя страница 11

11

USING BEVERAGE CENTER

CONTROLS

NOTE:

 

When the beverage center is turned On for the first 

time, the temperature defaults to the recommended 

setting.

 

There are two adjustable temperature controls, one 

for each compartment.

 

The left temperature and preset touch pads control 

the temperature of the upper compartment.

 

The right temperature and preset touch pads control 

the temperature of the lower compartment.

1. 

Turning Control On/Off

The first time that the beverage center is plugged in, 

the control will be in Cool Off mode. Cool On and Cool 

Off will be the only options that display.
Press COOL ON for 3 seconds to turn on the beverage 

center. All menus and recommended temperature 

settings will be displayed.

2. 

Auto Light Option

Features a proximity sensor in the base grille that 

automatically ramps on the LED interior display 

lighting when motion is detected. When motion is no 

longer detected, the interior display light will turn off 

after 2 minutes.

 

Press the AUTO LIGHT option to activate this 

feature.

 

When the Auto Light is not activated, the interior 

display light will only turn on when the door is 

opened.

NOTE:

 

Leaving the light on for an extended period of 

time will slightly increase the temperature of the 

beverage center.

3. 

Control Lock

A selectable feature that locks all controls except for 

Cool On and Cool Off.

 

To activate Lock Mode, press and hold LOCK for  

3 seconds. After the countdown, all other displays 

will turn off and become unavailable except Cool 

On, Cool Off and Lock.

4. 

Using Presets

For your convenience, your beverage center also 

has controls that are preset to recommended 

storage temperature for specific beverages. Pressing 

any preset option will set the temperature to the 

recommended temperature for the specified 

beverage:

 

Beverage: 34°F (1°C)

 

Party: 37°F (3°C)

 

Red Wine: 64°F (17°C)

 

White Wine: 50°F (10°C)

 

Champagne: 46°F (7°C)

 

Sweet Wine: 42°F (5°C)

5. 

Adjusting the Temperatures

To adjust set point temperatures, press “+” (plus) or 

“-” (minus) until the desired temperature setting 

is reached. The control is set correctly when the 

beverages are as cold as you like it.

NOTE:

 

The set point for the beverage center is 37°F (3°C) 

for the upper compartment and 50°F (10°C) for 

the lower compartment. The set point range for 

the upper compartment is 33°F to 40°F  

(0°C to 4°C) and 42°F to 64°F (5°C to 17°C) for the 

lower compartment.

 

Wait at least 24 hours between adjustments 

for the product to acclimate. Recheck 

the temperatures before making further 

adjustments.

6. 

Viewing Celsius/Fahrenheit 

Temperatures

Press the F/C touch pad to toggle between displaying 

the temperature in degrees Fahrenheit and degrees 

Celsius. The corresponding indicator will illuminate.

7. 

Sabbath Mode

Allows the door of the beverage center to be opened 

or closed during the Sabbath or other religious 

holidays without directly turning on or off any lights, 

digital readouts, solenoids, fans, valves, icons, tones, 

alarms or the compressor. By selecting this feature, 

the temperature set points remain unchanged, but 

the control panel lights, interior lights, and control 

audio turn off. For most efficient beverage center 

operation, it is recommended to exit the Sabbath 

Mode when it is no longer required.

 

Press and hold SABBATH for 3 seconds to turn on 

the feature. After the 3 second countdown, the 

feature will activate and all other displays will turn 

Off.

 

Press and hold SABBATH for 3 seconds to turn off 

the feature and turn on the display.

1

2

3

4

4

5

6

7

8

9

5

Содержание JUBFL242HL01




















Отзывы: