Ice maker is not
producing ice
Water filter
indicator light is
red
Ice forms in inlet
tube to ice maker
Refrigerator is
leaking water
30
Confirm ice maker arm is down. See
Automatic Ice
Maker
page 13.
See
Connecting the Water Supply
pages 4 and 5.
Turn off water supply and remove kinks.
If kinks cannot be removed, replace tubing.
Water pressure must be between 35 to 100 pounds
per square inch to function properly.
A minimum pressure of 35 pounds per square inch is
recommended for refrigerators with water filters.
See
Temperature Controls
page 8 to adjust controls.
Freezer must be between 0° to 2° F (-18° to -17° C) to
produce ice.
See
Ice Storage Bin
page 12.
See
Connecting the Water Supply
pages 4 and 5.
Self-piercing and
3
⁄
16
” saddle valves cause low water
pressure and may clog the line over time.
The
manufacturer is not responsible for property damage
due to improper installation or water connection.
If filter is not available, replace with bypass filter.
See
Water Filter
page 16.
See
Filter Status Indicator Light
page 15.
Water pressure must be between 35 to 100 pounds
per square inch to function properly.
A minimum pressure of 35 pounds per square inch is
recommended for refrigerators with water filters.
Open saddle valve completely.
See
Temperature Controls
page 8. Freezer temperature
should be between 0° to 2° F (-18° to -17° C).
The manufacturer recommends using copper tubing
for installation. Plastic is less durable and can cause
leakage.
The manufacturer is not responsible for
property damage due to improper installation or
water connection.
See
Connecting the Water Supply
pages 4 and 5. Self-
piercing and
3
⁄
16
” saddle valves cause low water
pressure and may clog the line over time.
The
manufacturer is not responsible for property
damage due to improper installation or water
connection.
Ice maker arm is up.
Household water supply is not reaching
water valve.
Copper tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Ice bin is not installed properly.
Improper water valve was installed.
Water filter needs to be replaced.
Filter indicator sensor needs to be reset.
Water pressure is too low.
Saddle valve not open completely.
Freezer temperature is too high.
Plastic tubing was used to complete
water connection.
Improper water valve was installed.
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Ice and Water
T
ROUBLESHOOTING
continued…