JENN-AIR
®
DETAILED PLANNING DIMENSIONS
4 of 4
9211AdZw817
IMPORTANT:
Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information.
Refer to the Installation or Use & Care Guide
before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
OPENING/CLEARANCE DIMENSIONS
JF42NFXDW
42" FRENCH DOOR BOTTOM MOUNT
A
A
B
D
H
G
F
E
I
L
K
J
C
M
O
N
N
O
R
P
Q
I
H
G
F
E
110º
110º
D*
A*
B*
Floor
C*
Wall
S
BACK VIEW
FRONT VIEW
w
D
A*
F
C
C
B
E
e
Water
Shutoff
MODEL #
JS42NXFXDE
in
cm
A*
Width (min.)
42
106.7
B
Width of recommended electrical
location
7
1
⁄
2
19.1
C
Distance from side of cabinet to
recommended water connection
location
6
15.2
D
Height (min.)
84
213.4
E
Height to recommended electrical
location
77
195.6
F
Depth of recommended water
connection location (max.)
1
2.5
e
Recommended electrical connection location
w
Recommended water connection location
* A minimum 2" (5.1 cm) furniture return must extend behind the face
of the cabinet on all sides.
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is
required. A dedicated circuit is recommended. Use an outlet that cannot
be turned off by a switch. Do not use an extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 30 and 120 psi (207
and 827 kPa) is required to operate the ice maker. Call a licensed,
qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT:
The pressure of the water coming out of a reverse osmosis
system going to the water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to the cold water
supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
LOCATION REQUIREMENTS
Floor must be able to support refrigerator (more than 600 lb [272 kg]),
door panels and contents of the refrigerator and must be at the same
level as flooring in the room.
42" FULLY INTEGRATED SIDE-BY-SIDE REFRIGERATOR
(BASE UNIT REQUIRES SUITE-COORDINATING FULL HEIGHT PANEL KIT OR CUSTOM PANELS AND HANDLES)
JS42NXFXDE – 41
3
⁄
4
" x 83
1
⁄
8
" x 24"
(without door/handles)
