Jenn-Air JMW2430D, Техническое образование

Страница: 49 / 60

COMPONENT ACCESS
Microwave Combination Wall Ovens
n
4-11
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
REMOVING THE BROIL ELEMENT.
At the front of the broil element is a broil guard
mounted with two screws. Remove the guard (the
front of the element will drop down a few inches).
From the back of the oven, remove two broil ele-
ment mounting screws.
Pull the element into the oven to get the wiring
harness connections to enter the oven from the
back.
Remove the electrical connections but make sure
the harness does not exit the oven cavity.
REMOVING THE OVEN SENSOR
The Broil Element will need to be removed to ac -
cess the Sensor mounting bracket.
Remove the screw mounting the oven sensor and
pull the sensor into the oven far enough that the
sensor quick disconnect plug enters the oven cavity.
Remove the electrical connection but make sure the
connector does not exit the oven cavity.
Oven Sensor mounting bracket (Broil element re -
moved).