3
Product Dimensions
*Serial number plate may be rotated up from behind the control
panel for viewing from the front of the range.
**Excludes handle. Dimension given is from wall to front of oven
door and will vary based on electric outlet receptacle
installation.
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64 cm)
countertop depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If installing a range hood or microwave hood combination above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.
A freestanding range may be installed next to combustible walls
with zero clearance.
NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than
¹⁄₄
" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal
cabinet.
A.
46⁷⁄₈
" (119.9 cm)
B. Model/serial number plate
(located behind the control
panel)*
C.
35⁷⁄₈
" (91.4 cm)
D. 29
⁷⁄₈
" (75.9 cm)
E. 26
⁵⁄₁₆
" - 27¼" (66.8 - 69.2 cm)**
A
E*
D
C
B
A. 13" (33 cm) upper cabinet
depth
B. 30" (76.2 cm) min. opening
width
C. For minimum clearance to the
top of the cooktop,
see NOTE.
D. 30" (76.2 cm) min. opening
width
E. Cabinet door or hinge should
not extend into cutout.
F. 3-wire shaded area* -
7" (17.8 cm) min. from left
side cabinet, 5¾" (14.6 cm)
max. from floor, 6" (15.2 cm)
max. width
G. 4-wire shaded area* -
10" (25.4 cm) min. from right
side cabinet, 5¾" (14.6 cm)
max. from floor, 6" (15.2 cm)
max. width
*Nothing located in shaded
areas can extend more than
1½" (3.8 cm) from wall or
range will not slide all the way
back.
H. 1½" (3.8 cm) min. from floor if
using a flush mount outlet.
A
B
D
F
E
C
G
H
