6
I
NSTALLATION
Handle Removal
(style varies by model)
Materials Needed:
•
3
⁄
32
” allen wrench
To Remove:
• Remove set screw from
handle mounting post
using
3
⁄
32
” allen wrench.
• Repeat the procedure on
all posts to remove the
handle.
To Replace:
• Align handle with the
mounting posts.
• Fully tighten all set screws to secure handle
in place.
Reinstallation of the Doors
1. Install hinge assemblies:
• Install top hinge loosely with
5
⁄
16
” hex
head screws.
• Install center hinge with Phillips
screws.
2. Place hinge side of freezer door on
bottom hinge pin and hold freezer
door upright while installing center
hinge pin with
5
⁄
16
” hex head driver.
• Replace plastic sleeve.
• Replace any applicable door shims.
• Make sure the hinge pin is installed
tightly.
3. Place hinge side of refrigerator door
on center hinge pin.
4. While holding refrigerator door upright, tighten
down top hinge with
5
⁄
16
” hex head driver and
replace hinge cover.
