2
Installation Instructions
Proper installation is the installer’s responsibility!
Write the model & serial numbers on the owner’s
manual. The model number label is located on the oven
front.
UL Listed-For use over electric heat source
models (Wall Ovens)
• MEW5527, MEW5530, MEW6527, MEW6530
• AEW3530, AEW4530
• JJW8527, JJW8530, JJW9527, JJW9530
WARNING
To avoid risk of electrical shock, personal injury,
or death, disconnect power to wall outlet before
beginning installation.
Parts, Tools, and Materials
The following parts are supplied with the oven:
Bracket Base
Bottom Duct
Foam Strip
Upper Duct
Air duct Bracket
Bottom Bracket
Top Bracket
Trim Frame
Air Duct Bracket
1” Screw
(1 required, 1 extra)
½” Screw
(18 required, 2 extra)
Template
Tools required to perform installation:
• Phillips Screwdriver
• Saw (Electric or Hand)
• Drill with 7/64” drill bits (Electric or Hand)
• Tape Measure
• Pencil
• Framing Square
• Level
Shipping Weight
• Approximate shipping weight is 15.7(30”), 14.9(27”)
lbs.
Cutout Dimensions
Dimensions
27”
30”
Height
16 7/8”
16 7/8”
Width
25”
25”
Depth (min.)
23 3/4”
23 3/4”
��������������������������
�����
�����
������
�������
WARNING
To avoid risk of electrical shock, personal injury, or
death:
• Before drilling into the wall, note where electrical
outlets are and where electrical wire might
be concealed behind the wall.
YOU COULD
GET AN ELECTRICAL SHOCK
if you contact
electrical wire with the drill bit.
• Locate and disconnect the power to any
electrical circuits that could be affected
by installing this oven.
IF YOU DO NOT
DISCONNECT THE POWER, YOU COULD GET
AN ELECTRICAL SHOCK
.
WARNING
To avoid personal injury, wear gloves when
handling the metal parts. Parts are sharp and can
cause cuts and abrasions.
Содержание AMC6158B
Страница 16: ......
