9
INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installation
Unpack Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut yellow straps and packing tape to
open box from top and remove the boxes.
2. Remove the warming shelf and grill grates from inside the grill
and remove the package inside the firebox.
3. Remove foam block and wrap from inside the grill.
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
Attach Right Side Shelf with Sear Burner
1. Unpack right side shelf with sear burner.
2. Remove 3 screws from the side of the searing side burner.
3. Loosen the 2 screws on the grill side panel and align the
bottom keyhole slots on the side shelf with the loosened
screws. Hook the side shelf onto the two loosened screws and
let the side shelf slide down so the screws are in the narrow
neck of the slots.
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the two screws to hold the weight
of the sear burner.
4. Attach the top of the side shelf to the grill (A) by inserting the
3 screws removed in Step 2 into the side shelf from inside the
grill hood and tighten.
5. Attach the bottom of the side shelf to the side panel (B) of the
grill by tightening the 2 screws inserted in the keyhole slots in
Step 3.
A. Warming shelf brackets
B. Warming shelf
Excessive Weight Hazard
Use two or more people to move and install grill.
WARNING
Failure to do so can result in back or other injury.
A
B
A
