SIDE BURNER HOSE QUICK-CONNECT ASSEMBLY
Estimated Assembly Time: Approximately 5 minutes
No Tools Required
1. Insert the side burner hose with female sleeve through side panel of cart (Top drawing).
2. Push the sleeve of the female socket back and insert male end of the connector.
Release the sleeve.
3. Push the socket until the female sleeve snaps forward to lock the fitting.
4. To disconnect the fitting, push the female sleeve back and pull the socket off the plug
(bottom drawing).
WARNING
1. Attach the coupling half (socket) to
the gas supply line in accordance
with NFPA54/ANSI Z223.1FUEL gas
code.
2. Prior to inserting the plug, test the
connection for leaks following the
leak test instructions on page 12.
After the leak test is completed, rinse
the connection with clean water to
remove any corrosive residue.
3. Do not use open flame to test for
leaks.
7
