6
Product features
• Device with microphone included
• The transmitter (the Baby Cry Detector) captures baby’s crying and sends a
sequence of flashes or vibrations on the receivers ( Jenile light or vibrating receiver
)
• The transmitter (the Baby Cry Detector) is equipped with an on/off power switch
to conserve battery power
• 2 settings to adjust the hearing sensitivity
Complementary products
• Fixed flash receiver : Centrale de gestion 8 diodes - FF8I14 / Flash Plug - FP14
• Wireless flash receiver: Flash Cube - CBM14
• Vibrating receiver: Pocket vibrator - VP15
Setting
Setting up is very easy.
Insert 2 AAA batteries (not included) by pushing the battery cover (C).
The test button remains to the “ON” position.
Position of the set button (A) :
• 0 : OFF - the Baby Cry Detector is switched off
• 1 : the Baby Cry Detector is switched on with a light sensitivity (recommended in
case the Baby Cry Detector is located very close to the baby)
• 2 : the Baby Cry Detector is switched on with a strong sensitivity ( recommended
in case the Baby Cry Detector is located far from the baby)
11
