14
3.
If you are satisfied with the selection you made you need to
press the [
]
ENTER
key to save the changes and move to the
next option.
4.
If you don’t need to change the current blinking option just press
the [
]
ENTER
key to move to the next parameter.
5.
If you need to go back to the previous parameter press the
[MODE/-] key for 2 sec.
a.
PASSWORD CHECK
page
You will only see this page if the
unit is password locked. To
change any settings or
calibration you need to unlock
the system to remove the
“
PASSWORD LOCKED
”
message. You need to enter the
correct 4-digit number on the
“
ENTER PASSWORD
” input.
You can still view all the pages of
Calibration/Setting mode
if the
system is password locked by just pressing the
[CAL/VIEW]
key on
this page. If the unit is “
PASSWORD LOCKED
” going to
Calibration/Setting mode
will not affect the function of the relays.
CAUTION:
If the unit is not locked then every time the user enters
the Calibration/Setting mode the relays and analog out will be
frozen.
