JENCO 6219, Руководство по эксплуатации

Страница: 20 / 21

19
incorporating the driver to your software you can then use the special
commands without worrying about the protocol between the meter and
your computer.
For the model 6250 Reading "MAN6250.TXT" in the accompanying disk
will jumpstart you to using the meter with its RS232C interface.
"MANUAL.TXT" is the general explanations of the various serial
commands available in the driver.
For the model 6219 Reading "MAN6219.TXT" in the accompanying disk
will jumpstart you to using the meter with its RC232C interface.
"MANUAL.TXT" is the general explanations of the various serial
commands available in the driver.
MODEL 6250/ MODEL 6219 RS232 PARAMETERS
BAUD RATE : 2400 (FIXED)
PARITY
: SOFTWARE DRIVER CONTROLLED
DATA BITS : 8
STOP BIT : 1
PROTOCOL : SOFTWARE DRIVER CONTROLLED.
WARRANTY
Jenco Instruments, Ltd. Warrants this product to be free from significant
deviations in material and workmanship for a period of 1 year from date of
purchase. If repair or adjustment is necessary and has not been the result of
abuse or misuse, within the year period, please return-freight-prepaid and
the correction of the defect will be made without charge. If you purchased
the item from our Jenco distributors and it is under warranty, please contact
them to notify us of the situation. Jenco Service Department alone will
determine if the product problem is due to deviations or customer misuse.
Out-of –warranty products will be repaired on a charge basis.