WWW.JEIUK.COM
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
9
Figure 4 shows how annular cutters operate. As the cutter penetrates the workpiece, the
pilot pin recesses into the arbor and tightens the spring. As a result, after the cutter goes
through the entire thickness, the slug core is expelled from the cutter.
Figure 4.
Annular cutters operation
Annular cutters are designed to establish only through holes shown in Figure 5. Establishing
incomplete through holes requires
not using
the pilot pin.
Figure 5.
Types of holes to establish with annular cutters
IMPORTANT INFORMATION
Only use your Minibeast AUTO to cut through single layers of material when using standard
annular cutters.
Do not
attempt to cut through multiple layers/stacks/laminates of material with your (Insert
Model) magnetic drilling machine using standard annular cutter. Once the first plate has
been drilled, the centre slug will retain in the cutter. Attempting to continue the cutting
incomplete through holes
complete through holes
slug core
spring
pilot pin
annular cutter
arbor
