BM-7
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI GROUP LTD is prohibited.
15
Part number:
UST-0509-16-00-00-0
R2
R3
R4
R5
4. ACCESSORIES
4.1. Radius insert positioner
Allows the guide to be set properly for bevelling with a radius of 2, 3, 4, or 5 mm.
Unplug the machine from the power source, place the machine upside down, and
then lower the sleeve to access the cutting inserts. Next, place the positioner from the
top (
1
, Fig. 9) so that the edge marked with a given radius is aligned with the edges of
three cutting inserts with the same radius
(
2
). Finally,
rotate the sleeve (
3
) so that the
guide makes contact with the positioner (
4
).
Fig. 9.
Adjusting the guide for bevelling with radius
2
4
1
3
