Assembly instruction
Status: 03.05.2022
Mercedes E-Class
W124 Doorboard
Art. No. 75170
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I phone: 07127-93457-0 I [email protected] I www.jehnert.de
6. mounting the door trim on the vehicle doors.
The mounting of the door panels is done directly on the mounted
door panel on the vehicle door.
6.1 Insert the processed door lining from above into the plug-in clips on the
window shaft with the hooks, inserting the locking button into the door lining.
Note lower mounting hook for original card pocket:
These are not used. The panels replace the factory map pocket
- The panel fastening (see p. 9) is used to fasten the lower part of the
door panel is fastened to the inner door panel.
6.2. hang linkage on door handle and insert inner door panel (3 slots).
6.3 Fasten the handle on the inside with a screw.
TIP:
The screw on the handle is microencapsulated. It must either be
replaced or screwed in with screw locking compound.
6.4 Continue to fasten in reverse order as described on page 3.
6.5.
IMPORTANT - additional fi xing point
when mounting the door trim:
At the upper front original fastening point of the map pocket
(see illustration), screw the supplied sheet metal screw 3.9 x 13
through the door panel into the inner door panel.
Sheet metal screw 3,9x13
