Removing the grills:
The Velcro fasteners stick together very strongly!
The grills can be removed anytime by carefully lifting them off.
Please, avoid any way of forceful yanking at the grills.
It could break!
9.3.
9.2.
Our Tip:
If the panel cannot be pressed on completely at some points. . .
Cause:
the special form at these points and the resulting differences in
material cross section of the grill.
Solution:
the distance can be levelled out with spacers 3 under the
Velcro disc.
(Spacers included with the screw kit)
1.1. Roll down window completely.
1.2. Unscrew the head cap screws at the inner door latch lever (A) and pull away
upward. Remove the head cap screws D1 + D2 underneath.
1.3. Remove the head cap srews C1 + C2 from both sides of the door lining.
1.4. Carefully squeeze the door panel out of the sealing above and simultaneously
move it horizontally and forward away from the inner door metal.
1.5. Unlook door lock Bowden pull wire.
1.6. Pull off the switch of the electric window control.
1.7. Unplug the original cables and remove the original subwoofer.
9.1. Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound
when it is closed correctly.
A
1 . Disassembly of the door lining
75156 - Audi A 4
- 3 -
© JEHNERT SOUND DESIGN
75156 - Audi A 4
- 12 -
© JEHNERT SOUND DESIGN
C
1
D
1
D
2
C
2
�
9. Installation of the speaker’s grill:
grill
2 self-adhesive Velcro-strip
1 Velcro fastener
3 Washer M4 ø 20 as spacer
doorpanel
