Assembly instruction
Status: 07.02.2023
Fiat Ducato III + Serie 8,
CampTec Style
Basic Installer Paket, 2-Ways
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art. No. 68501
C
D
A
B
E
F
C:
Remove the protective paper of the enclosed Alubutyl blanks, heat them with a hair dryer and press them fi rmly
with the butyl side (adhesive) on the sheet metal behind the woofer opening -> wear gloves as heat protection!
D:
Screw in the JEHNERT Upgrade loudspeaker with the original screws and connect the original plug to the
connect the loudspeaker
A:
Use a plastic wedge to carefully lift the cover of the woofer and remove it.
B:
Use a Phillips screwdriver to loosen the screws of the woofer, remove it and
disconnect the cable from the housing.
E:
Push the foam hose over the connector and slide it through the opening into the free space
under the fairing
F:
Finally, replace the plastic cover and clip it in place.
1a. mounting the woofer (Serie III)
(at original woofer mounting position)
