Installation instructions
Status: 19.02.2024
Fiat Ducato Serie 7 /Serie 8
Cab system
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art. No. 65580
1. Mounting of the mid-high module on the dashboard (series 7)
1.1 JEHNERT midrange driver
Remove from the module.
1.2 JEHNERT midrange module without loudspeakers on the
dashboard. Align the dashboard:
Place the curvature of the module against the curvature of the
of the dashboard and ensure that there is an
and make sure that there is an even distance between them.
1.3 Mark the speaker cutout on the dashboard (white marker).
1.6 Heat the marked cutout well with a hot air dryer and
and cut out with a sharp cutter knife.
1.4 Loosen the rubber door seal in the area of the A-pillar.
1.5 Carefully lever out the A-pillars with the plastic wedge
and remove them from the vehicle in twos.
Wölbung
gleichmäßiger
Abstand
