Page 1
Installation Instructions for 81540
MIG100 Gasless Welder
PLEASE READ MANUAL CAREFULLY BEFORE USING.
SAFETY INFORMATION
Before using welder, please ensure that you know:
1. Arc welding can be dangerous.
2. This welding machine must be connected to a power source in accordance with appliance electrical codes.
3. For safety turn off and unplug machine when installing new wire spool, adjusting wire tension roller or replacing
contact tip.
4.
The contact tip is electrically “hot” and if it contacts the grounded work piece it will cause damage.
5. All installation, maintenance, repair operation of this equipment should be performed by qualified technicians in
accordance with national, state and local codes.
6. Electric shock could kill.
7. Disconnect from power source before assembling, disassembly or maintenance of the torch or contact tip or
changing wire spools.
8. Fumes and welding gases can be dangerous.
9. Welding sparks can cause fire or explosion.
10. Arc rays can burn.
11. Hot metal will burn.
12. Electromagnetic fields may be dangerous.
WARNING!
PLEASE BE REMINDED TO WEAR ALL PROTECTION DEVICES BEFORE WELDING IN A SAFE PLACE.
SPECIFICATION
Process(s)
Flux-Cored MIG
welding
GAS/FLUX
Flux
Input Voltage
110 V AC
Input Current
20 A
Input Frequency
60 Hz
Output Current Range
50-90A
Rated Duty Cycle
20% @90A
Open Circuit Voltage
27V AC
Wire Feed Speed
Infinite adjustable
Current Settings
4 Position
Flux cored welding wire dia.(inch)
0.03
’’-0.035’’
Insulation class
F
Protection class
IP21S
1-800-345-4545 jegs.com
Содержание MIG100
Страница 2: ...Page 2 1 800 345 4545 jegs com ...
