background image

 

                                              1-800-345-4545   jegs.com

 

 

LED Functions 

1. 

Flashing Red: The Battery is connected improperly or not functioning at all. 

2. 

Solid Red: The Battery is charging. 

 

3. 

Flashing Green: The Battery is nearly completely charged. 

 

4. 

Solid Green: The Battery is completely charged, and the Maintainer is monitoring the charged Battery. 

 

After Use 

1.

 Separate the Quick-Connector plugs and cap them with the attached caps. 

 

2.

 Unplug the AC Adapter. 

 

 

3.

 Depending on the Connector in use, either: 

 

•   Stow Ring Terminal Connector safely next to battery. Keep clear of belts, blades, and any other    

                 moving engine parts. 
 

•   Remove Clip Connector from battery. 

 
4.

 Wipe the Charger with a clean, dry cloth and store indoors out of reach of children. 

 

Maintenance Instructions 

Procedures not specifically explained in this manual must be performed only by a qualified technician. 

 

WARNING

 

TO PREVENT SERIOUS INJURY: Unplug the charger, disconnect any battery, and allow charger to 

cool completely before performing any inspection, maintenance, or cleaning procedures. 
 
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or 
vibration occurs, have the problem corrected before further use. 
 
1. BEFORE EACH USE,

 inspect the general condition of the charger. Check for: 

• loose hardware, 
• cracked or broken parts, 
• damaged electrical wiring or cable insulation, and 
• any other condition that may affect its safe operation 
 

2.

 If the fuse needs replacing: 

a. Disconnect the Connector from the AC Adapter and/or the battery. 
b. Uncap the Fuse Housing. 
c. Remove the spent fuse and replace with a new 7.5 Blade-type fuse. 
d. Recap the Fuse Housing.

 

Note: Aside from the fuse, this device does not contain any user replaceable parts. If it needs service, take it to a 
qualified technician. 
 

3.

 AFTER USE, wipe external surfaces of the tool with clean cloth.

  

 

4. WARNING!

 If the supply cord of this charger is damaged, it must be replaced only by a qualified service 

technician. DO NOT OPEN CHARGER HOUSING, NO USER-SERVICEABLE PARTS INSIDE. 

 

Parts List 

Part 

Description 

Qty 

AC Adapter 

Ring Terminal Connector 

Clip Connector 

 
 
 
 

Содержание 81961







Отзывы: