Parts List
1
(2) Leg
2
(2)
Pin
[555-81518-6]
(2) Adjustment Beam
(2) Steel Plate
[555-81518-4]
(1) Frame
(2) Spring
[555-81518-3]
(1)
Jack
[555-81518-2]
(1) Mandrel
(1) Jack Plate
(1) Jack Handle
[555-81518-1]
6
7
8
9
10
3
4
5
Страница 1: ...User Guide for 81518 Hydraulic Shop Press 6 Ton Tabletop ...
Страница 2: ...2 Leg 2 2 Pin 555 81518 6 2 Adjustment Beam 2 Steel Plate 555 81518 4 1 Frame 2 Spring 555 81518 3 1 Jack 555 81518 2 1 Mandrel 1 Jack Plate 1 Jack Handle 555 81518 1 6 7 8 9 10 3 4 5 1 1 1 2 2 3 4 4 5 7 6 6 8 9 10 ...
Страница 3: ...ing it clock wise until tight 3 Pump handle until the ram is near the work piece 4 Align ram to work piece as needed 5 Pump handle to apply load to work piece Do not overload 6 Release pressure by turning the release valve counterclockwise Make sure your work piece is secure to prevent injury or damage 7 Remove work piece from press bed 2 Specifications Capacity 6 Tons Working Range 0 230 mm Width...
Страница 4: ...ss before each use Do not use if crack leaks or other damage is found 2 Periodically oil moving parts including the pump piston and hydraulic ram 3 Check hydraulic connections and hoses before each use Do not use if there are cuts leaks or other damage Symptom Possible Cause Collective Action Pump ram cannot be moved Pump lacks pressure Ram does not retract or does so slowly Moving parts may be bi...
