Use right tool for the job.
Do not attempt to force a small tool or attachment to do the work of a larger industrial
tool. There are certain applications for which this tool was designed. It will do the job better and safer at the rate for
which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
Dress properly.
Do not wear loose clothing or jewelry as they can get caught in moving parts. Protective,
electrically nonconductive clothing and nonskid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
Use eye protection.
Always wear ANSI approved impact safety glasses underneath a full face shield during use.
Also wear heavy duty work gloves.
Do not over reach.
Keep proper footing and balance at all times. Do not reach over or across running machines.
Maintain tools with care.
Keep tools clean for better and safer performance. Follow instructions for lubricating and
changing accessories. The handles must be kept clean and dry from oil and grease at all times.
Remove adjusting keys and wrenches.
Check that keys and adjusting wrenches are removed from the tool or
machine work surface before starting work.
Stay alert.
Watch what you are doing. Use common sense. Do not operate any tool when you are tired.
Check for damaged parts.
Before using any tool, any parts that appear damaged should be carefully checked to
determine that it will operate properly and perform its intended function. Any part that is damaged should be
replaced.
Replacement parts and accessories.
When servicing use only identical replacement parts. Use of any other parts
will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available
from our company.
Do not operate tools if under the influence of alcohol or drugs.
Read warning labels on prescriptions to
determine if your judgment or reflexes are impaired while taking drugs
WARNNG:
The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Part
Description
QTY
1
Vertical Column
1
2
Handle (300mm)
1
3
Bolt M10 x 70
4
4
Rear Cross Beam
1
5
Bolt M8 x 65
2
6
M14 Washer
4
7
3-1/2
” Wheel
2
8
M14 Nut
4
9
Pin
1
10
Bolt M12 x 25
1
11
M8 Nut
2
12
M8 Spring Washer
2
13
M10 Spring Washer
4
14
M10 Nut
4
15
3
” Wheel
2
16
Front Cross Beam
1
17
Middle Beam
1
18
Turning Plate
1
19
Mounting Arms
4
20
Bolt M14 x 60
4
21
M8 Washer
2
22
Pipe
2
23
M10 Washer
8
1-800-345-4545 jegs.com
