Operation
Prior to each use, visually inspect jack. Check for cracks, cracked welds, and missing and/or damaged
parts. Any jack that appears to be damaged in any of these ways must not be used.
To Lift
Close release valve tightly by turning clockwise. Adjust screw extension to desired height. Pump handle
up and down until vehicle is lifted.
Using the crimped end of jack handle, tighten the valve screw (A) located at the base of jack, by turning it
clockwise.
Assemble jack handle (B) and insert into housing (C). Pump handle up and down to raise jack to desired
height.
For added height: Before raising jack turn extension screw head (D) counter clockwise to desired
position.
To Lower:
Open the release valve very slowly by turning counter-clockwise. Turn valve screw (A), ¼ to
½ a turn counter-clockwise Jack will slowly lower itself. Re-tighten (A) to stop jack at any desired height
.
1-800-345-4545 jegs.com
D
A
A
B
C
