background image

USER MANUAL

JEFVACWD020-230

20L

  WET & DRY VACUUM CLEANER 

 1400W 

 230V

~

50Hz

USER MANUAL

JEFVACWD020-230

20L

  WET & DRY VACUUM CLEANER 

 1400W 

 230V

~

50Hz

www.jeffersontools.com

www.jeffersontools.com

6

7

  OPERATION GUIDE 

 

Ensure the electrical supply is disconnected.

1. 

Undo the clasps.

2.

 Lift off the motor housing assembly. 

3. 

For dry vacuum cleaning use the paper dust bag supplied.

4.

 For wet vacuum cleaning fit the supplied foam filter. 

5.

 Replace the motor housing onto the container.

6. 

Align the motor housing with the clasps and snap closed by hooking the top of the clasp into the location in the 

motor housing and pressing the handles down over centre.

7.

 Insert the suction hose in the hole on the side of the tank, turn the hose connector to lock in place.

8. 

Fit the required cleaning attachment. 

9.

 Use the ON / OFF Switch to control the power to the vacuum cleaner as required.

10.

 Empty the container before it gets full to avoid loss of vaccum power. 

Note:

 Never operate the cleaner without a filter fitted as this will damage the vacuum cleaner and invalidate your 

warranty.

  MAINTENANCE 

 

• Ensure the machine is unplugged from the power supply.
• Disconnect the hose from the drum container.
• Undo the clasps and remove motor housing from the drum container.
• Clear out any dirt or debris from the drum container and hoses. 
• Frequently clean the seat where the safety float slides and check for wear and damage 
• Clean the foam filter as required by washing it in mild soapy water.
• Check the power cable and plug for damage everyday, before use (repair any wear or damage before use) 

  TROUBLESHOOTING 

 

 

FAULT

CAUSE

REMEDY

The vacuum cleaner will not operate 

1. No power supply or incorrect power supply or 
problem with RCCB 
2. Fuse has blown or incorrectly rated
3. Faulty power cable
4. The container is full

1. Check power supply - cable, breakers, fuses
2. Unplug and check the power cable. If
damaged have it replaced by your local Sealey
stockist.
3. Replace the fuse with a correctly rated alternative
4. Empty the container

Dust expelled from the motor cover

The cartridge filter missing or damaged

Fit cartridge filter or replace damaged filter

Reduced efficiency and increased motor/
speed vibration

1. There is a blockage in the hose, nozzle, drum inlet 
2. Dirty or damaged filter

1. Check and remove any blockages in the nozzle, hose 
and drum container inlets
2. Remove filter and clean it or install new filter as required.

        

           

Information on Disposal for Users of Waste Electrical & Electronic Equipment 

  

 

 

This symbol on the product(s) and / or accompanying documents means that used electrical and electronic products should  

 

 

not be mixed with general household waste.  For proper treatment, recovery and recycling, please take this product(s) to 

 

 

designated collection points where it will be accepted free of charge.

For private households: 

 

Dispose of this product at the end of its working life and in compliance with the EU Directive on Waste Electrical and Electronic 
Equipment (WEEE). Contact your local solid waste authority for recycling information for this equipment.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the 
environment, which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with you national legislation.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union.  If you wish to discard this product please contact your local authorities or dealer and ask for the 
correct method of disposal.

  RoHS Directive 2011/65/EU - COMPLIANCY  

We hereby declare that this equipment has been tested and found to be compliant to RoHS Directive 2011/65/EU of the European Parliament and 
the Council from 08/06/2011 on restriction of the use of certain hazardous substances in electrical and electronic appliances.

Determination of levels of regulated substances in electrotechnical products, elements of Cadmium (Cd), Lead (Pb), Mercury (Hg), Chromium (Cr) 
and Bromine (Br) contents were measured by XRF Spectroscopy and chemical confirmation test for RoHS restricted substances. 

  ENVIRONMENTAL PROTECTION

 

  

Recycle any packaging and unwanted materials instead of disposing of them as waste. All tools, accessories and packaging  

 

 

should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. 

 

 

When the product becomes completely unserviceable, reaches the end of its working life and requires disposal, drain off any  

 

 

fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.

  WEEE Waste Electrical and Electronic Equipment Statement  

 

Отзывы: