USER MANUAL
JEFSUBPDW225-80
750W
SUBMERSIBLE WATER PUMP 230V
www.jeffersontools.com
3
1.
Float Switch
2.
Float Adjustment Clip
3.
Carry Handle
4.
Power Cable & Plug
5.
Motor Casing
6.
Outlet / Discharge Hose Connection
7.
Base
1
EQUIPMENT IDENTIFICATION
6
4
5
3
7
Read and ensure that you understand all of the operating instructions, safety precautions and warnings in this Instruction
Manual before operating or maintaining this equipment. Most accidents that result from operation and maintenance are
caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a
potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Never use this equipment
or modify it in any way that has not been specifically recommended by the manufacturer. Contact a qualified electrician for
advice on any issues relating to electrical safety in your working environment.
SAFETY GUIDELINES
•
We recommend that you fit a
Residual Current Circuit Breaker (RCCB)
in the main distribution
board and that a
Residual Current Device (RCD)
is used when operating this equipment.
•
The
Electricity at Work Act 1989
includes legislation that places legal implications on employers
to ensure the safety of electrical devices in the workplace. The regulations dictate that all portable
equipment must be inspected regularly and tested to ensure that it is safe for use. 'Portable
equipment' means any electrical item that can be moved and this is often referred to as
Portable
Appliance Testing (PAT)
. PAT testing should be carried out regularly on this equipment by trained,
authorised personnel, as required by the legislation.
•
The
Health and Safety at Work Act 1974
states that it is the responsibility of the owner of electrical
appliances to ensure that both the equipment and working environments are maintained to ensure
safe operation at all times.
Cable Grip
Neutral
Wire
(Blue)
Earth
Wire
(Brown)
Earth Wire
(Yellow
& Green)
13 Amp
Fuse
2
