USER MANUAL
v1.2
JEFFANDRM30-110
30
"
HIGH VELOCITY DRUM FAN • 123W • 110V
~
50Hz
www.jeffersontools.com
6
OPERATION
Please ensure that you read, understand and apply safety instructions in before attempting to use this equipment.
Check that the speed control is set to “
0
” (
OFF
) and then plug into the mains power supply and switch the power on.
The fan is equipped with 2 speed settings (
"1" = Low "2" = High
) to control the rate of air flow delivered. Select the speed setting you require us-
ing the switch located at the back of the fan, above the motor.
Adjust the direction of the air flow by moving from side to side and tilting the fan up or down, as required.
When you have finished using the fan ensure you turn the speed control switch back to "
0
” (
OFF
) and disconnect the fan from the mains
power.
MAINTENANCE
Equipment - General Cleaning:
•
Use a soft, damp cloth to clean the fan after use .
•
Never use solvents, petroleum, paint thinner or other chemicals to clean the fan.
Cleaning The Fan Blade:
•
Undo the cross headed screws around the circumference, remove the grille and clean the blade with a slightly damp cloth.
•
Replace the grille as required and refit the cross headed screws.
Servicing:
Should the motor, switch or the power lead require service or maintenance contact your local service agent.
Storage:
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, environment and safe from
children and animals.
