3
USER MANUAL v1.2
JEFPDB0750-12S
750W
Pillar Drill • 12-Speed • 230V ~50Hz
www.jeffersontools.com
Specifications:
A
Max Drilling Diameter
25mm(1”)
Motor Power
750W
Chuck Capacity
5-20mm
Input Voltage - Frequency
230V - 50Hz
B
Spindle Travel
85mm
Number of Speeds
12
Speed 50Hz
280-2830R.P.M.
C
Spindle Taper
MT3
D
Max. distance from spindle axis
to surface of column
176mm
E
Max. distance from spindle end
to surface of table
685mm
F
Max. distance from spindle end
to surface of base
1175mm
Swing
352mm
Table Size
290X290mm
Base Size
460X270mm
G
Column Diameter
80mm
H
Height
1600mm
NW/GW
71/75kg
Safety Information:
Warning: this symbol is used throughout the instructions whenever there is a risk of personal injury. Ensure that these warnings are
read and understood at all times. When using electric tools, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury: You should not operate this machine unless you are thoroughly familiar with drilling machines
and drilling techniques. If there is any doubt whatsoever you should consult a qualified person.
Please read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury. Store this instruction manual in a safe place for future reference.
General Safety
•
Always ensure that air can circulate around the machine and that the air vents are unobstructed.
•
Always keep work area clean & tidy. Cluttered work areas and benches increase the risk of accidents and injury.
•
Never over-reach. Maintain a balanced footing at all times.
•
Never use or store this equipment in a wet/damp environment or expose to rain.
•
Keep untrained personal, children and pets away from the work area.
•
Never operate a machine when under the influence of alcohol, drugs or medication.
•
Always ensure the workplace is well lit. Ensure that lighting is placed so that you will not be working in your own shadow.
•
Do not use tools in the presence of flammable liquids or gasses.
•
Stay alert at all times, watch what you are doing, use common sense and do not operate the tool when you are tired.
