SPECIAL DESIGN FEATURES
MACHINED ALUMINUM CHASSIS:
Precision-machined chassis with integrated heat-sinks,
milled from a solid block of aircraft grade aluminum, provides exceptional thermal
heat transfer/dissipation during the charging cycles.
4 LAYER CIRCUIT BOARDS:
All circuits are implemented on mil-spec, 4 layer circuit board
substrate for extremely low output impedance and noise. Large low impedance
ground plane areas for extended internal star-grounding.
HIGH-PRECISION SURFACE MOUNT COMPONENTS:
Extensive use of Lead (Pb)-free, low
temperature coefficient, active and passive surface-mount components results in
significantly smaller loop areas, reduced circuit capacitance and inductance, and
introduces less noise than conventional leaded components.
POWER FACTOR CORRECTION:
Power Factor Correction (PFC) in the power supply reduces
AC line harmonic noise pollution and increases AC line power utilization to 99% during
the capacitor recharge cycles.
REMOTE ON/OFF:
A 1/8” (3.5mm) mini plug connector on rear panel permits PSU
operation with a 12 V dc remote signal.
PAGE 6
