problems on associated electronic components, speakers, speaker wires, and interconnects,
particularly in complex audio systems consisting of multiple amplifiers and multiple source
components.
SETTING OUT 2 OFFSET
Enter
MENU
.
Scroll and select
OUT 2 OFFSET
. The balance indicator bar temporarily shows the
amount of offset. Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION RIGHT
(
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons.
SETTING INPUT OFFSET
Enter
MENU
.
Scroll and select
INPUT OFFSET
. The balance indicator bar temporarily shows the
amount of input gain offset. Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION RIGHT (
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons.
ADJUSTING
OUT 2 OFFSET
Enter
MENU
.
Scroll and select
OUT 2 OFFSET
.
The balance indicator bar temporarily shows the
amount of offset.
Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION
RIGHT (
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons.
FACTORY RESTORE
Enter
MENU
.
Scroll and select
FACTORY DEFAULTS
.
This action returns all configuration and
adjustments to the original factory-set default values: Main and record volume levels are set to
0dB, input device name assignments are cleared, input and output gain offset adjustments are
zeroed, and the
CRITERION PREAMPLIFIER
is returned to AC operation.
NOTE: PRESSING AND HOLDING THE MUTE BUTTON ON THE CRITERION PREAMPLIFIER'S
CONTROL CHASSIS FOR APPROXIMATELY 10 SECONDS, THEN RELEASING, WILL FORCE A
RESET OF THE PREAMPLIFIER’S HARDWARE AND RETURN MAIN AND RECORD VOLUME TO 0
d
B.
24
