PAGE 4
Copyright JEFA Tech, Inc. - All rights reserved - http://www.jefatech.com
AIRGATEWAY (INDOOR ACCESS POINT) INSTALLATION
The AIRGATEWAY (black box) is an indoor unit and should be placed in a convenient
location to provide a WiFi signal to your devices. It broadcasts your private WiFi signal.
Attach the black rubber duck antenna to the AIRGATEWAY to provide maximum coverage.
The black rubber duck should ideally be vertical, but will still function if it is not. You can
use the included wall mount to attach the unit to a wall or other solid surface if desired.
Route the black Shielded Cat5e inside to where you will have your AIRGATEWAY.
If you
have to pull the connector and cable through a tight opening, tape over the connector
to protect it.
Be careful not to pull too hard on the connector or you may damage it.
Instead of pulling on the connector, wrap a pull string and tape around and 6 to 12 inches
down the cable so that you are pulling the cable, and not pulling the connector.
Connect the black shielded Cat5e cable to the port marked
POE
on the AIRGATEWAY.
Connect power to the AIRGATEWAY using the supplied AC power cord. This single
power connection will power both the AIRGATEWAY and BULLET.
