17
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
6
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Wagon Frame
When In A Fully Locked Position
Back
Front
Insert On
Both Sides
Fig. 6A
Fig. 6B
Fig. 6C:
Attaching Evenflo Car Seats - Evenflo®
Nurture™ and Embrace™
:
Lock the rear wheels (Fig. 6). Press both
buttons located on the front side of the
adapter and rotate into a downward position
(Fig. 6A). Attach the car seat adapter to the
stroller frame (Fig. 6B) until it clicks into
a fully locked position (Fig. 6C). Place car
seat into car seat adapter until it “CLICKS”
into a fully locked position. Evenflo car
seats “CLICK” and lock on the back of the
adapter when in a fully locked position (Fig.
6D). Make sure car seat is fully fastened by
pulling upward.
Fig. 6
Push downward on brake
lever to lock wagon
Lock The Rear Wheels:
Attaching Car Seat Adapter:
Securing Car Seat With Velcro Straps:
Locking Tabs
Located On Both
Sides Of Car Seat
Securing Car Seat With Velcro Straps
:
Final step to secure the footrest side of car seat onto wagon, use the
straps with velcro to secure seat onto wagon. (Fig. 6D). Check that car
seat is securely attached by pulling up on the car seat. To remove, undo
latches and unlock car seat from adapter.
NOTE:
For Evenflo car seats, use
extended straps located on side of 5-in-1 infant car seat adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Car Seat In A Fully
Locked Position
Car Seat Locking
Tabs Lock On Both
Sides When In A Fully
Locked Position
ATTACH EVENFLO
®
CAR SEATS
Evenflo Nurture™ and Embrace™
Fig. 6D
Extended
Straps
