To Activate/Deactivate
Push the ON/OFF button. To turn the system
off, push the ON/OFF button a second time.
NOTE:
A soft tap on the brake pedal, pushing the CAN-
CEL button or normal brake pressure while slow-
ing the vehicle will deactivate the Speed Control
without erasing the set speed from memory.
To Set A Desired Speed
When the vehicle has reached the desired
speed, push the SET (-) button and release.
Release the accelerator and the vehicle will
operate at the selected speed.
To Resume Speed
To resume a previously set speed, push the
RES (+) button and release. Resume can be
used at any speed above 20 mph (32 km/h).
For further information and applicable warn-
ings and cautions, please refer to your Owner’s
Manual at www.jeep.com/en/owners/manuals.
Tip n' Slide Seats
This feature allows the front seats to be rotated
toward the instrument panel to allow easier
entry into the rear seats on two door model
vehicles.
1. Pull upward on the recline lever and bring
the seatback to its full forward position.
2. Rotate the entire seat assembly toward the
instrument panel.
NOTE:
This procedure works for both driver and pas-
senger seats.
For further information and applicable warn-
ings and cautions, please refer to your Owner’s
Manual at www.jeep.com/en/owners/manuals.
To Fold Down The Rear Seat
Locate the release lever located on the upper
outboard side of the seat, then lift it upward
until the seatback releases. Slowly fold the
seatback forward.
For further information and applicable warn-
ings and cautions, please refer to your Owner’s
Manual at www.jeep.com/en/owners/manuals.
SEATS
