Jeep Renegade 2018, Руководство пользователя, Страница: 150 / 300

Active Drive Control — If Equipped
The Power Transfer Unit (PTU) is locked to
ensure immediate availability of torque to the
rear drive axles. This feature is selectable in
AUTO mode and automatic in the other driv-
ing mode. 4WD LOCK can be enabled by the
following ways:
• When the 4WD LOCK button is pushed.
• When the Selec-Terrain switch is rotated
from AUTO to any other off-road modes.
Active Drive With Low Control — (Trailhawk
Models Only)
The 4WD LOW mode helps to improve the
off-road performance in all modes. To enable
4WD Low, please follow the steps below:
Enabling 4WD LOW
With the vehicle stationary, the ignition in
RUN mode or with the engine running, shift
the transmission into NEUTRAL and push
the button once 4WD LOW. The instrument
cluster will display the message "4WD LOW"
once the shift is complete.
NOTE:
• Both LOCK and LOW LEDs will blink and
then become active on the Selec-Terrain
switch until the shift is complete.
• The instrument cluster display will illumi-
nate the "4WD Low" icon.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle
must be stationary and the transmission
shifted into NEUTRAL. Push the 4WD LOW
button once.
SELEC-TERRAIN
Selec-Terrain combines the capabilities of
the vehicle control systems, along with driver
input, to provide the best performance for all
terrains.
Selec-Terrain Switch
Selec-Terrain Switch (Trailhawk)
ST
ARTING
AND
OPERA
TING
148